Section 5.8
Fuel Supply Valve
To determine if the fuel supply valve is causing starting difficulty, check that the fuel supply valve is open; refer to OEM guidelines.
- If the fuel supply valve is open, check the fuel filters; refer to "5.9 Plugged Fuel Filter(S)" .
- If the fuel supply valve is closed, repair is necessary; refer to "5.8.1 Fuel Supply Valve Repair" .
Section 5.8.1
Fuel Supply Valve Repair
Perform the following steps for fuel supply valve repair:
- Correct valve operation or replace valve.
- Prime the fuel system, refer to MBE 900 Service Manual (6SE9007), operation and verification chapter-preparation for a first time start.
- Verify fuel supply valve repair; refer to "5.8.1.1 Test Engine with Fuel Supply Valve Open" .
Section 5.8.1.1
Test Engine with Fuel Supply Valve Open
To determine if opening the fuel supply valve resolved starting difficulty, perform the following steps :
 PERSONAL INJURY |
|
To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake is set, and the wheels are blocked. |
- Attempt to start and run the engine, if the engine starts and runs, no further troubleshooting is required. Shut down the engine.
- If the engine fails to start and run, check the fuel filters; refer to "5.9 Plugged Fuel Filter(S)" .
| EPA07 MBE 900 DDEC VI Troubleshooting Guide - 6SE580 |
| Generated on 10-13-2008 |