Section 18.1
Engine Manufacturer Diagnostics Definitions
Description – lists the service fault code description which is displayed on the service tool and the extreme value which needs to be met for the fault to be set
Monitored Parameter – the component which is being monitored
Typical Enabling Conditions - conditions which also need to be true for enabling conditions to be active (i.e. coolant temp greater than 100°F)
Monitor Sequence – additional unique conditions which also need to be true in order for enabling conditions to be active (i.e. fault X must also be active in order to monitor a particular failure)
Execution Frequency – how often the fault is monitored when enabling condition (if any) are met
Typical Duration – length of time fault needs to be present to become active, may also include number of drive cycles which need to be completed for fault to become active
| EPA07 Series 60 DDEC VI Troubleshooting Guide - 6SE567 |
| Generated on 10-13-2008 |